Self Inking Ideal Custom Rubber Stamp Ink Pads slide out like a drawer. This allows the pad to be re inked through the top, re-inking from the face of the pad, or replaced completely.
Ideal stamp ink is formulated for clean, crisp, fast-drying impressions without bleeding or fading on most paper stocks. A selection of ink colors is available in 6cc and 2oz containers. To assist you in re-inking there are instructional pictures on top of the Ideal Stamp ink well. These pictures translate well in any language!
Re Inking the Custom Ideal Rubber Stamp.
1. Push down to lock line and slide into position.
2. Pull out ink well.
3. Stop when you hear a click.
4. Fill well with ink then close and wait 15 minutes.
You may also completely remove the pad and rub the tip of an Ideal Ink bottle over the pad in a circular motion. Be careful that only small amounts of ink are released from the bottle as you rub the face of the pad. Don't over ink. 6-10 drops are enough for most Ideal Custom Inking Stamps. If they have become very very dry 15-20 drops may be needed.
Replacing the Ink Pad in the Custom Ideal Rubber Stamp.
Same procedure as inking but you throw out the ink pad and replace it with a new one.